Directional Traffic Control Spikes - Road Blade | Tiger Teeth
Directional Traffic Control Spikes also called TIGER TEETH SPIKES are frequently used to enforce one way traffic in a single traffic lane, such as the entrance or exit to a parking lot.
Easy to maintain. No need to replace the entire unit. Just order the one foot top plate module assembly. A complete drop in module that includes top plate, teeth, spring and bearing blocks. Simply unbolt, lift out the old one and drop in the new one. No unprotected lanes! Quick and easy.
Easy to maintain. No need to replace the entire unit. Just order the one foot top plate module assembly. A complete drop in module that includes top plate, teeth, spring and bearing blocks. Simply unbolt, lift out the old one and drop in the new one. No unprotected lanes! Quick and easy.
Tooth Design Eliminates Correct Direction Damage to Tires & Destroys Tires Going the Wrong Direction. Ultimate Protection!
Surface mounted spike system also serves as a speed bump to slow down the flow of traffic
Exclusive Tooth Design by Road Blade has been in use for years - Beware of Imitators.
No raised bolt heads - True Flush Top Plate Design, Super Thick 1/2" Steel Top Plate
Model RB36 with Latch Down
Surface Mounted
Model RB72-3 with Latch Down
In Ground Flush Mount
(520)780-9751
Call Christine for a price quote today
Powder Coated Red w/ PC Yellow Teeth
→Maximum corrosion protection
→Superior long-term solvent, chemical, and abrasion resistance
→Outstanding impact resistance
Powder Coated Red w/ PC Yellow Teeth
→Maximum corrosion protection
→Superior long-term solvent, chemical, and abrasion resistance
→Outstanding impact resistance
Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry location or parking lot. Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by enforcing one-way traffic lanes.
Speed bumps should always be used to force drivers to slow down while driving through the controlled entry point. Speed Bumps control vehicular traffic to a safe and required 5 MPH speed while driving over parking lot traffic spike strips. Click Here for More Info on Speed Bumps.
Traffic Spike Warning Signs must be used with one way or directional control traffic spikes to warn drivers that a one-way traffic lane exists and that severe tire damage may occur. Click Here for More Info on Traffic Spike Warning Signs.
Copyright © 2013 Secure Lane LLC, All Rights Reserved Terms
Contact the webmaster at: christine@secure-lane.com
3618 S. Calexico Ave. Tucson, AZ 85730 USA (520)780-9751
3 Foot Surface Mounted Sections
Surface Mounted Spike Sections are easily adhered or bolted to an asphalt or concrete roadway.
3 Foot Flush Mounted Sections
Easy to Handle 3 Foot In Ground/Flush Mount Traffic Control Spike Sections.
Photo of the ROAD BLADE In Ground Flush Mounted Heavy Duty Spikes in use at a trucking facility. Proof that the Road Blade is tough enough to handle fully loaded semi trucks!
3/8" Thick Steel Teeth
Load Rated: 40,000 lbs/20 Tons per single axle load per Axle. Super Heavy Duty!
1/2" thick Steel Plate
Load Rated: 40,000 lbs/20 Tons per single axle load. Super Heavy Duty!
